Section 3 Assembly and adjustment of Engine
(I) Closing assembly of left & right crankcase
1.Installment
.Crankshaft
(Install to right crankcase)
Caution:
When installing the crankshaft, fasten the con-
necting rod to the installing hole of cylinder
with hand.
2.Installment
Spindle assy and driving shaft assy
3.Installment
.Balance shaft
.Fork 1
.Fork 2
.Fork 3
.Shift cam
.Short fork shaft
.Long fork shaft
Caution
.Lubricate each gear and bearing.
.Before closing, be sure to set the shift mecha-
nism at neutral and active in operation.
- 179 -