(Iii)If The Hb Indicated Lamp Is Out Of Work - ATV 200 Service Manual

(III)If the HB indicated lamp is out of work

1.Bulb and bulb socket
.Check if bulb and bulb socket circuit B are
correct.
Pass
2.Reverse switch
Refer to "Inspection of switch"
Pass
3.Voltage
.Connect pocket multimeter (DC 20V)to the
taillight terminal
Multimeter (+) ¡ú brown terminal ¢Ù
Multimeter (+) ¡ú green/blue terminal ¢Ú
.Adjust main switch to "ON"position.
.Check voltage (12V)
Meet specification
No failure on this circuit
No electrification
Replace bulb and bulb socket
No electrification
Replace handlebar switch(left)
Y
Y Y
B B
B
Out of specification
If there is failure on the circuit from main
switch to the bulb socket coupler, repair it.
Y
B
- 141 -