5.Remove
.Chain tensioner
Caution:
Before removing the chain tensioner, loosen
the screw firstly.
6.Remove
.Bolt
Timing sprocket
Caution:
.When loosening the bolt, it is needed to fix
the hand starting ratchet
.Grasp the metal wire to avoid the timing chain
to drop into crankcase.
7.Remove
.All the bolts and nut on the cylinder cover.
Caution:
Loosen every bolt and nut by1/4 circle, then
disassembly
.Loosen them, from big one to small one ac-
cording to the numbers marked on the cylin-
der cover.
8.Remove
.Cylinder cover unit
.Cylinder cover pad
.Location pin
.Oil seal
.Lower guide plate (exhaust side)
- 146 -