ATV 200 Service Manual page 97

5.Installment
¢ÙCam shaft of rear brake ¢Ù
¢ÚIndicating plate of brake ¢Ú
¢ÛRear brake arm assy ¢Û
Caution
When installing the brake indicating plate ¢Ú
to rear brake can shaft ¢Ù,be sure to align the
projective part@of brake indicating plate ¢Ú
with the concave part of rear brake cam
shaft ¢Ù .
At the same time, align the punch mark on
the rear brake cam shaft with that of the
rear brake arm assy ¢Û .
The torque of rear arm assy:9N.m
6.Application
Sealing agent:Be suitable for the rear brake
cover assy and rear wheel axle bushing
surface.
Attached:Sealing agent:P/N:ACC-QUICK-
GS-KT
7.Installment
¢ÙRear brake cover assy ¢Ù
¢ÚBearing block of rear brake ¢Ú
Caution:
Install the rear brake cover with bolt ¢Û , the
torque of bolt installment is :28N.m.
- 91 -