ATV 200 Service Manual page 211

¢Ú
¢Ù
¢Û
¢Ü
¢Ù
20. Mount:
¡¤ Valve cover ¢Ù (mount o-ring in the sealing
groove of throttle cover first)
¡¤ Valve cover ¢Ú (mount o-ring in the sealing
groove of throttle cover first)
¡¤ Spark plug ¢Û
Caution
Check the o-ring, if it is deformed or damaged,
replace it.
21. Mount:
¡¤ Sprocket chamber cover ¢Ù (mount o-ring in
the sealing groove of sprocket chamber cover
first).
Caution
Check the o-ring, if it is deformed or damaged,
replace it.
22. Mount:
¡¤ O-ring ¢Ù
¡¤ Carburetor seat ¢Ú
¡¤ Washer ¢Û
¡¤ Carburetor ¢Ü (mount o-ring in sealing
groove first)
Caution
Check all o-ring . If it is damaged, replace it.
23. Mount:
¡¤ Carburetor seat and carburetor (on cylin-
der cover)
¡¤ Wire clamp ¢Ù
Caution
The carburetor seat and the o-ring in the seal-
ing groove of cylinder cover connecting sur-
face can' t be forgotten to mount.
- 205 -