ATV 200 Service Manual page 174

- 168 -
Piston pin
1)Inspection
.If the color is changed, or indent is found,re-
place piston pin, then inspect the Lubrication
system.
2)Measurement:
.Outer diameter @ (Piston pin)
Out of specification,replace it
Outer diameter(piston pin):14.994~15mm
3)Measurement:
.Inner diameter of piston pin
Out of specification,replace it
Inner diameter of piston pin hole
15.002~15.01mm
4)Measurement
.Clearance between piston pin and piston pin
hole
Clearance between piston pin
and piston pin hole=
Inner diameter of piston pin hole
Outer diameter of piston pin@
Clearance between piston pin and piston pin
hole
0.008~0.01mm
Limit 0.05mm
-@