ATV 200 Service Manual page 112

- 106 -
Caution
Don't loosen the nut after marking the stan-
dard torque.If the recess on the nut is not cor-
respondence with the split pin on the bolt, cor-
rect it by fixing the nut.
Warning
Must use new split pin ¢Û
10.Mount front brake cap assy brake shoe assy
front brake hub and front wheel.
Refer to "installation of front wheel and front
brake"of this chapter.
11.Adjust front wheel toe-in
Refer to "Adjustment of Front wheel toe-in"in
chapter 2.
12.Mount front fender,safety lever, front
carrier,
Refer to the second section of chapter2.