(Iii)If The Hb Indicated Lamp Is Out Of Work - ATV 250 Service Manual

(III)If the HB indicated lamp is out of work

1.Bulb and bulb socket
.Check if bulb and bulb socket circuit B are
correct.
Pass
2.Reverse switch
Refer to "Inspection of switch"
Pass
3.Voltage
.Connect pocket tester (DC 20V)to the tail-
light terminal
Multimeter (+) ¡ú brown terminal ¢Ù
Multimeter (+) ¡ú green/bule terminal ¢Ú
.Adjust main switch to "ON"position.
.Check voltage (12V)
Meet specification
No failure on this circuit
No electrification
Replace bulb and bulb socket
No electrification
Replace handlebar switch(left)
Out of specification
If there is failure on the circuit from main
switch to the bulb socket coupler, repair it.
-141-