Replacing The System Board - Gateway 9510 User Manual

Replacing the system board

To replace the system board:
1
Follow the instructions in
2
Follow the instructions in
3
Remove the memory modules. For more information, see
page 66.
4
Remove all of the expansion cards. For more information, see
expansion cards" on page
5
Remove the heat sinks and processors. For more information, see
processor" on page
6
Disconnect the power and data cables from the system board, noting their locations
and orientation. (You will reconnect the cables after you install the new board.)
"Preventing static electricity discharge" on page
"Opening the server case" on page
69.
73.
www.gateway.com
Replacing the system board
41.
42.
"Installing memory" on
"Installing PCI
"Installing a
95