To configure the onboard SCSI RAID solution for Integrated Striping:
1
Open the BIOS Setup utility as described in the previous procedure.
2
On the Main menu screen, use the arrow keys to select an adapter, then press E
The Adapter Properties screen opens.
3
Use the arrow keys to select
screen opens.
4
Use the arrow keys to select the first disk for the IS volume, then use the arrow keys
to move to the Array Disk column for this disk, and use the + and - keys to select
as the value for this column.
Yes
If partitions are defined on the selected disk, a message appears warning you that data
on the disk will be lost when the striped volume is created. You can then deselect
that disk or erase the disk and continue.
5
Repeat the previous step to select as many as five more disks for the striped volume.
If partitions are defined on the selected disks, a message appears warning you that
data on the disk will be lost when the striped volume is created. You can then deselect
that disk or erase the disk and continue.
6
When you have selected all disks for the IS volume, press E
then exit this menu
then exit this menu
The IS volume exists as soon as you save the changes. The RAID Properties screen now
displays the IS volume properties and status.
RAID Properties
. (If you do not want to create the volume, select
.)
www.gateway.com
Configuring your onboard RAID solutions
, then press E
. The RAID Properties
NTER
and select
SC
.
NTER
Save changes,
Discard changes,
117