Configuring Arrays And Logical Drives - Gateway 9510 User Manual

Chapter 6: Configuring your RAID solutions
The following table describes the options available on this screen.
Option
Adapter
Config Wizard
Channel
Properties
Config View
Device Progress
Enclosure
Log Data
Advanced
Help
Exit

Configuring arrays and logical drives

Automatic RAID configuration
After starting the Configuration Wizard, if you chose one of the auto configuration options,
Web Console displays the proposed RAID configuration in the Logical Devices window.
Each logical drive has a label (such as LD1), RAID level, and drive capacity. Click
to complete the configuration process.
You can delete a logical drive by clicking on it in the bottom config view pane and selecting
from the right config view pane.
Delete
140
Description
This option lets you configure the adapter properties.
This option provides a series of options to let you create
new drive arrays, add capacity to existing arrays, or
modify existing arrays.
This option lets you configure the properties of the
available SCSI channels on the RAID controller.
This options lets you switch between the Logical and
Physical drive views.
Shows progress of an operation being performed, such
as array initialization.
Displays the enclosure status, including its attached
drives.
This option lets you configure the logged data output.
This option lets you change the RAID server name, log
data location, and firmware location. It also performs a
firmware update.
This option provides the RAID configuration help
screens.
This option lets you exit from the utility and prompts for
reboot.
www.gateway.com
Accept