Initial Hardware Settings - Gateway 9510 User Manual

Initial hardware settings

Initial hardware settings
Your server comes from the manufacturer with the correct initial hardware settings to
operate your server as configured. However, at some point you might want to change
settings to reflect a tasking change, a change in security requirements, or the addition of
new resources to your server.
General hardware settings, as well as the onboard LSI RAID solution, can be changed by
using the BIOS Setup utility, and advanced RAID settings for the Intel ROMB RAID solution
can be changed by using the RAID BIOS Console or Web Console (or the specific RAID
console which accompanied a customized, add-in RAID solution).
For information on the BIOS Setup utility, see "Using the BIOS Setup Utility" on page 99.
For information on BIOS settings, see "BIOS Settings" on page 183. For information on
the RAID BIOS Console utility, see "Configuring your RAID solutions" on page 109. For
information on a specific RAID console for an add-in RAID solution, see the documentation
on that hardware which accompanied your RAID solution.
www.gateway.com 23