Gateway 9510 User Manual page 75

Chapter 4: Installing Components
To replace, add, or reseat a PCI expansion card:
1
Follow the instructions in
2
Follow the instructions in
3
Follow the instructions in
4
If you are replacing a card, disconnect any cables that are attached to the old card.
5
Push the top of the card retention clip down slightly, then rotate it out the back of
the case.
Card
retention
clip
70
"Preventing static electricity discharge" on page
"Opening the server case" on page
"Removing the air ducts" on page
www.gateway.com
41.
42.
46.