Starting Your Server - Gateway 9510 User Manual

Starting your server

Before you start your server for the first time:
Make sure that the server and monitor are plugged into a power outlet or UPS and
■
that the UPS (if you are using one) is turned on.
Make sure that all cables are connected securely to the correct ports and jacks on
■
the back of the server.
Caution
To start the server:
1
Press the power button.
When the power/sleep
LED is...
Green
Off
Slowly blinking
When you connect peripheral devices to the server, make sure that
your server and devices are turned off and the power cords are
unplugged.
Power button
Power/sleep
LED
It means...
The server is turned on.
The server is turned off.
Low power state (S1 — S3)
www.gateway.com
Starting your server
19