Gateway 9510 User Manual page 77

Chapter 4: Installing Components
9
Press on the card retention clip on the back of the server until the clip is flush with
the back of the case.
10
If you are installing a full-length card, reinstall the front PCI card retainer.
11
Connect any cables to the card. For more information, see the instructions in the card's
documentation.
12
Follow the instructions in
13
Follow the instructions in
14
See the card's documentation for software installation instructions.
72
"Installing the air ducts" on page
"Closing the server case" on page
www.gateway.com
Card
retention
clip (from
outside
the case)
47.
52.