Table of Contents
Advertisement
8
Lift the system board away from the case and place it in a static-free bag on a stable
work surface.
9
Insert the new system board into the case, aligning the holes in the board with the
threaded standoffs on the side of the case.
10
Secure the system board to the case with the seven (7) screws you removed previously.
11
Reinstall the memory by following the instructions in
page
66.
12
Reinstall the processors by following the instructions in
page
73.
13
Connect the power and data cables.
14
Reinstall the expansion cards by following the instructions in
expansion cards" on page
15
Follow the instructions in
16
Turn on your server.
69.
"Closing the server case" on page
www.gateway.com
Replacing the system board
"Installing memory" on
"Installing a processor" on
"Installing PCI
52.
97
Advertisement
Table of Contents
Troubleshooting
