Gateway 9510 User Manual page 76

6
For full-length cards, remove the front PCI card retainer by pressing on the clips (top
and bottom) which hold it to the chassis.
Front PCI
card retainer
7
If you are replacing a card, remove the old expansion card. To loosen the card you
can slightly rock the card end-to-end, but do not bend the card sideways.
Caution
8
Press the new card into the expansion slot. To help insert the card you can slightly
rock the card end-to-end, but do not bend the card sideways.
Do not touch the contacts on the bottom part of the expansion card.
Touching the contacts can cause electrostatic damage to the card.
www.gateway.com
Installing PCI expansion cards
71