Gateway 9510 User Manual page 137

Chapter 6: Configuring your RAID solutions
Registration Server Operation
When the networking option is enabled in Web Console, the RAID server will look up
the registration server address in the regserv.dat file and resolve it to an IP address through
the hosts file or through DNS resolution. The RAID server will then register its name and
address with the registration server. Each RAID server that is registered with the registration
server will display on the Web Console screen.
A RAID server or a client system that does not have a RAID controller installed can be
used to remotely manage a RAID server through a standard Web browser interface. To do
this, point the browser at the registration server using either the host name or the IP address
of the registration server, such as
The Local SetPass utility must be used to set a password on each RAID server. SetPass is
installed as part of the Web Console installation.
132
http://w2k:3570 or http://192.168.1.1:3570.
www.gateway.com