Gateway 9510 User Manual page 89

Chapter 4: Installing Components
8
Loosen the thumbscrew securing the power distribution module to the chassis.
9
Lift the power distribution module off the standoffs and remove it through the back
of the power supply cage.
Caution
10
Insert the new power distribution module into the back of the power supply cage.
11
Place the power distribution module on the mounting standoffs and secure with the
thumbscrew you previously loosened.
12
Reinstall the center divider into the power supply cage by engaging the mounting
tabs into the chassis slots.
13
Reinstall the screw securing the center divider into the power supply cage.
84
Thumbscrew
Be careful not to damage the power distribution module cables or
connectors while feeding the cables through the back of the power
supply cage.
www.gateway.com