Gateway 9510 User Manual page 117

Chapter 6: Configuring your RAID solutions
Important
9
Configure the RAID options, then exit the RAID BIOS console.
10
Reboot the server.
To configure the SATA RAID solution:
1
Open the BIOS Setup utility as described in the previous procedure.
2
Select
Configure
3
Press the S
PACEBAR
indicator changes from READY to ONLINE.
4
Press
Enter
configurable arrays.
112
When you press
the error message: Error (0146): Insufficient Memory to Shadow
PCI ROM may appear. This error message is produced because the
BIOS does not have sufficient memory to load the SATA RAID option
ROM into memory because other option ROMs are already loaded.
This is not a functional problem and can be disregarded. If you receive
this message, press
from the Management menu, then select
to associate the selected physical drives with the current array. The
when you finish creating the current array, then press F10 to select
www.gateway.com
C + E
to configure the SATA RAID controller,
TRL
F1
to continue.
.
Easy Configuration