Installing The Touch Panel Driver, Msr Utility And The Other Devices - Epson MR Series Technical Reference Manual

2. Select [Start Menu] and open the control panel.
3. Select [Printers and Other Hardware] in the control panel.
4. Select [System] in the [See Also].
5. The System dialog is displayed. Select the [Hardware] tab.
6. Click Device Manager.
7. Select [Other Devices] - [PCI Serial Port] in the list, and click Properties.
8. The Properties dialog box is displayed. Click Reinstall Driver.
9. The [Welcome to the Hardware Update Wizard] dialog box is displayed. Select the "Install
from a list or specific location" checkbox and click Next.
10. The [Hardware Installation] dialog box is displayed. Click Continue Anyway.
11. The [Completing the Hardware Update Wizard] dialog box is displayed. Click Finish.
12. Next the Serial Port 1 is automatically recognized and the [Welcome to the Found New
Hardware Wizard] dialog box is displayed. Select the "Install the software automatically"
check box and click Next.
13. The [Hardware Installation] dialog box is displayed. Click Continue Anyway.
14. The [Completing the Found New Hardware Wizard] dialog box is displayed. Click Finish.
15. Next the Serial Port 2 is automatically recognized and the [Welcome to the Found New
Hardware Wizard] dialog box is displayed. Select the "Install the software automatically"
check box and click Next.
16. The [Hardware Installation] dialog box is displayed. Click Continue Anyway.
17. The [Completing the Found New Hardware Wizard] dialog box is displayed. Click Finish.
Uninstalling the serial port driver
Uninstalling cannot be done.

Installing the Touch Panel Driver, MSR Utility and the Other Devices

See the Installation of Other Drivers section on page 4-45.
4-18 OS and Drivers Rev. I