Removing the IM-800 Rear Case
To remove the IM-800 rear case, follow these steps:
1. Remove 3 screws indicated by the arrows below.
2.
Remove the IM-800 rear case.
To install, reverse the removal procedure.
Removing the Covers
IM-800 Upper Case
1. Remove the two screws (S13) indicated below:
screw (S13)
2. Push the IM-800 rear case toward the front of the unit and then lift it off as shown below.
9-42 Disassembly and Assembly
IM-800 rear case
IM-800 upper case
Rev. I