Dc Jack Board - Epson MR Series Technical Reference Manual

DC Jack Board

Follow the steps below for disassembly.
1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the rear case. (See page 9-11.)
4. Remove the rear panel. (See page 9-13.)
5. Disconnect the 1 cable shown below. Remove 2 screws (1052).
cable
DC Jack board(122)
screw (1052)
6. Remove the DC Jack board.
To install, reverse the removal procedure.
9-34 Disassembly and Assembly Rev. I