Lcd - Epson MR Series Technical Reference Manual

LCD

Follow the steps below for disassembly for the model DM-M820-014/024 and DM-M820-015/
025.
Note:
If you remove the LCD for the model DM-M820-013/023, follow the steps below except step 5.
1. Remove the rear case. (See page 9-11.)
2. Remove the front case. (See page 9-13.)
3. Remove the rear panel. (See page 9-13.)
4. Remove the LCD Circuit Board. (See page 9-15.)
5. Remove the touch panel unit or touch panel assembly. (See page 9-18 or page 9-22.)
6. Disconnect 1 cable from the inverter circuit board.
cable
inverter circuit board
7. Remove 4 screws (S16) securing the LCD.
screw (S16)
screw (S16)
9-24 Disassembly and Assembly
screw (S16)
LCD
screw (S16)
Rev. I