Epson MR Series Technical Reference Manual page 114

Button Modes
The following screen is displayed for the Button Modes tab.
Set the details of the operation of the button mode.
❏ [Edit mode]
Select the button mode name to edit. It is possible to register new button modes. For the
operation of each button mode, see the "Events" section.
❏ [Button (Left, Right)]
Clicking the Left radio button selects the left click or the left double click operation to be
edited. In the same way, clicking the Right radio button selects the right click or the right
double click operation to be edited.
❏ [Show on menus]
Clicking the checkbox causes the button mode edited to be registered and displayed as a
menu on the pull up menu displayed when clicking the touch panel driver setting icon in the
system tray.
❏ [Triggers]
Set the detailed operation of the button mode. The details of each item are as follows.
• Down 1:
This sets the touch operation recognized as the 1st click.
• Up 2:
This sets the touch operation recognized as the click
cancellation.
• Down 3:
This sets the touch operation recognized as the 2nd click.
(Down 3 becomes valid when it executed in the click time.)
• Up 4:
This sets the touch operation recognized as the 2nd click
cancellation.
4-64 OS and Drivers Rev. I