Epson MR Series Technical Reference Manual page 80

14. Select the network service. Set it to your system. Then click Next.
15. The following dialog box is displayed. When Next is clicked, installation starts.
16. The dialog box that specifies the directory of the copy origin is displayed. Insert the
CD-ROM of Windows NT in the CD-ROM drive and input D:\ (if the CD-ROM drive is the
D drive) and click OK.
17. In accordance with the environment used, continue the installation according to the
instruction on the screen.
18. When installing is completed, according to the instruction of the screen, reboot the system.
CAUTION:
If the network is installed after the setup, an error is caused in the logon procedure. After
installing the network driver, install the Service Pack 6a.
4-30 OS and Drivers Rev. I