Epson MR Series Technical Reference Manual page 103

Note
In Windows NT/2000/XP, only an administrator can change the value. In Windows 2000 /XP, the
tolerance needs to be made larger for each registered user account with this tool. Regular users can click
[Default].
1. Select Programs - Gunze - U-TP - Settings in that order from the Start menu.
2. Pointer Device Properties is displayed. Click the Windows tab.
3. Slide [Time], [Height], and [Width] of the Double Click Settings group box to appropriate
values and click [Apply]. Click [Default] to choose the default value.
4. Double-click the Double Click button of the Mouse Click Test group box to check if the
double-click is recognized correctly. If it is recognized correctly, the icon will be changed.
5. Click OK.
Touch panel settings tool
Note
In Windows NT/2000/XP, when executing the Touch Panel Settings Tool, only an administrator can
change the settings. The values set by the administrator are available for all users. If the user who is not an
administrator executes the Touch Panel Settings Tool, the following dialog box appears. If [OK] is clicked,
the Touch Panel Settings Tool will be displayed and the settings can be shown but cannot be changed.
Rev. I
MR Series Technical Reference Manual
OS and Drivers 4-53