Touch Panel Circuit Board - Epson MR Series Technical Reference Manual

Touch Panel Circuit Board

Follow the steps below for disassembly.
1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the rear case. (See page 9-11.)
4. Remove the rear panel. (See page 9-13.)
5. Remove 4 hex screws (S07) and remove the cable.
touch panel
circuit board(116)
hex screw(S07)
cable
6. Disconnect the 2 cables shown below. Remove 2 screws (1051), and remove the touch panel
circuit board.
touch panel
circuit board(116)
screw (1051)
To install, reverse the removal procedure.
Rev. I
MR Series Technical Reference Manual
Disassembly and Assembly 9-31
cable
screw (1051)
cable