Calibration
The following screen is displayed when the Calibration tab is clicked.
Set the detailed items about the calibration condition.
❏ [Calibration settings for]
Select the touch panel device name to set. "Device 1" is usually selected.
❏ [Calibration modes]
This names the calibration modes including user settings and loads the one selected.
❏ [Add]
This saves a new set calibration mode.
❏ [Remove]
This removes a saved calibration mode.
❏ [Calibration points]
Sets the number of the calibration points between 2-25.
❏ [Timeout]
After the calibration program is executed, if the calibration is not started within the time set
by the Timeout, it is cancelled.
❏ [Start in at]
This sets the space (as a percentage) between the outside of the screen and the calibration
points.
❏ [Rotate]
This is not supported. This item cannot be set.
❏ [Calibration pattern]
This displays the pattern of the calibration point.
Rev. I
MR Series Technical Reference Manual
OS and Drivers 4-67