Epson MR Series Technical Reference Manual page 139

this file should be specified as [.PKL]. The format has the following sections and entries:
File format
Section Entry
[General]
Version
IgnoreCommands
SystemParam00
[MSR]
ValidTracks
Beep
CodeType
CardStart
CardEnd
Track1Start
Track1End
Track2Start
Track2End
Track3Start
Track3End
JIS2Start
JIS2End
CodeDefinition00
When nothing is described after the entry, the entry setting is deleted.
For Sysparam00 and CodeDefinition00, set numeric numbers in a range from 00 to 99. Set the numeric values one
by one in ascending order. Do not input the same numeric value for more than one.
Rev. I
Parameter
(underlined parameters
are the default values)
PKL100
Selected from Off and On
Selected from 1, 2, and 3
On, Off
US, JP, FR, GR, SP
MR Series Technical Reference Manual
Remarks
Fixed value. Be sure to describe at the start.
Fixed value. Be sure to describe at the start.
Be careful that if On is selected, the subsequent
commands are not accepted.
Set in the Offset and Value formats.
00h < Offset ≤ FFh, 00h ≤ Value ≤ FFh
Selection of more than one value may be
selected.
For information on input enabled characters, see
SS/ES Code Input Enabled Characters.
[<, >, |] are characters and can be input.
Input the hexadecimal as [\nn] within a range
from [01h] to [7Fh].
Effective up to 7 characters. The 8th character
and those thereafter are neglected.
Because even the line-feed character is
effective, do not carelessly input a space or a
tab.
See "Code Conversion Entry" on page 4-90 for
further details.
OS and Drivers 4-89