Installation For Windows Xp Professional Locally Procured Edition; Installation Procedure - Epson MR Series Technical Reference Manual

Installation for Windows XP Professional Locally Procured Edition

Installation Procedure

If you install Windows XP Professional locally procured edition, follow the steps below.
Windows
Insert the Windows XP startup disk and CD-ROM; then turn on the IM-800 to
perform the setup. Enter the product key of the COA package. You can set up
the Network automatically or set it up later.
Serial port Driver Installation
Install the software from the Driver CD-ROM for the IM-800.
When using the DM-M820 with Touch Panel, follow the steps below.
Touch Panel Driver Installation
Install the Touch Panel Driver from the CD-ROM for the DM-M820. See
page 4-45 for the procedure.
The double click setting
Set up this setting every time a new user starts using Windows XP.
MSR Utility Installation
When using the DM-M820 with MSR, install the MSR utilities from the
CD-ROM for the IM-800. See page 4-50 for the procedure.
Other software Installation
When using OPOS-ADK, APD (Windows printer drivers) and Unimini,
install the software from the Driver CD-ROM for the IM-800.
Setup procedure
Windows XP is set up by using the following procedure:
1. Connect the keyboard and mouse to the IM-800.
2. Insert the CD-ROM of Windows XP in the CD-ROM drive and boot up the system.
3. The [Welcome to Setup] screen is displayed. Press the Enter key.
4-16 OS and Drivers
Professional Installation
XP
Rev. I