Rear Panel - Epson MR Series Technical Reference Manual

Rear panel

Follow the steps below for disassembly.
1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the rear case. (See page 9-11.)
4. Remove 4 hex screws (S07).
5. Remove 8 screws (S05) securing the rear panel to the LCD assembly. After that remove the
rear panel.
screws (S05)
screw (S05)
screws (S05)
Note:
The ground wires are not attached to the model without a touch panel.
9-30 Disassembly and Assembly
DM-M820-014/024/015/025
screws (S05)
rear panel
screws (S05)
Rev. I