Installing The Serial Port Driver; Installing The Touch Panel Driver, Msr Utility And The Other Devices - Epson MR Series Technical Reference Manual

8. Uninstalling is completed and the dialog box is displayed. Click Finish.

Installing the Serial Port Driver

Note
COM1/COM2 can be used without installing the driver. If you use COM3/COM4, you need to install the
driver.
If the standby mode of the Operating System is selected, the current mode automatically changes to the
standby mode even if the data is being output to COM ports.
1. Insert the Driver CD-ROM for the IM-800 in the CD-ROM drive.
2. Select [Start Menu] - [Settings] and open the control panel.
3. Select [System] in the control panel.
4. The System dialog is displayed. Select the [Hardware] tab.
5. Click Device Manager.
6. Select [Other Device] - [PCI Serial Port] in the list, and click Properties.
7. The Properties dialog box is displayed. Click Reinstall Driver.
8. The Upgrade Device Driver Wizard dialog box is displayed. Click Next.
9. The dialog box which specifies the search method of the driver is displayed. Confirm that
[Search for a suitable driver for my device] is selected and click Next.
10. The dialog box which specifies the place of the search of the driver file is displayed. Check
[Specify a location] and click Next.
11. The dialog box for the location of the driver file is displayed. Input D:\Win2K\Serial to the
directory and click OK.
12. The confirmation dialog box of the device is displayed. Confirm that the [PCI Serial Port] is
selected and click Next.
13. When installation of the driver is completed, a dialog box is displayed. Click Finish.
14. The ITE8872 Properties dialog box is displayed. Set up necessary items and click Close.
Uninstalling the serial port driver
Uninstalling cannot be done.

Installing the Touch Panel Driver, MSR Utility and the Other Devices

See the Installation of Other Drivers section on page 4-45.
Rev. I
MR Series Technical Reference Manual
OS and Drivers 4-25