Touch Panel Circuit Board
Follow the steps below for disassembly.
1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the rear case. (See page 9-11.)
4. Remove the rear panel. (See page 9-13.)
5. Remove 4 screws (1051), and remove the touch panel circuit board.
cables connected to
the switch circuit board
screw (1051)
touch panel circuit board
cables
To install, reverse the removal procedure.
9-14 Disassembly and Assembly
screws (1051)
Rev. I