Hdd - Epson MR Series Technical Reference Manual

3.5"HDD

The IM-800 has 3.5"HDD type and 2.5"HDD type.
1. Remove the IM-800 upper case. (See page 9-42.)
2. Remove the riser frame. (See page 9-43.)
3. Remove the CD/FDD bracket. (See page 9-49.)
4. Remove the HDD bracket, HDD power cable and HDD cable. (See page 9-53.)
5. Remove the HDD assembly in the direction of the arrow.
Note:
When you install the HDD assembly, the 4 clips must be hooked completely.
clips
6. Remove the 3 screws (S13) shown below.
HDD bracket
Rev. I
MR Series Technical Reference Manual
L
L
clips
HDD assembly
screw (S13)
screws (S13)
Disassembly and Assembly 9-55