Rear Panel - Epson MR Series Technical Reference Manual

Rear panel

Follow the steps below for disassembly.
1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the rear case. (See page 9-11.)
4. Remove hex screws (S07).
DM-M820-014/024/015/025
5. Remove 8 screws (S05) securing the rear panel to the LCD assembly. Then remove 2 screws
(S05) holding 2 ground wires (one on each side) and lift up the ground wires. After that
remove the rear panel.
screws (S05)
screw (S05)
screws (S05)
Note:
The ground wires are not attached to the model without a touch panel.
Rev. I
screw (S05 ) and cable
screw (S05 ) and cable
MR Series Technical Reference Manual
DM-M820-013/023
screws (S05)
rear panel
screws (S05)
Disassembly and Assembly 9-13