Epson MR Series Technical Reference Manual page 65

3. Write all data saved in step 2 onto a CD-R.
4. After saving the data, the directory under the C:\backup\recovery directory may be
deleted.
❏ Backing up each driver
Each directory under the C:\backup directory is the backup of each driver, which can be
backed up through individual saving.
Recovering method
❏ Editing the start-up disk
Edit CONFIG.SYS and AUTOEXE.BAT created in "Preparing a Recovery Medium" to the
device on which the image data has been saved.
❏ Recovering
1. Connect the medium or drive onto which the data has been saved in "Preparing a
Recovery Medium" to the IM-800.
2. Start the system by using the start-up floppy disk created in "Preparing a Recovery
Medium."
3. Enter "x: [enter]" (x: Drive with the image file).
4. The following message appears. Select and enter the partition size of the HDD.
Please select the system partition size.
1: 10GB (Default size)
F: Full size of HD.
Please push a key of 1 or F._
5. Execute Start.bat.
6. Following the title "EasyRestore," the EPSON Logo Startup screen is displayed. Select
Continue.
7. After the OS is recovered, set up the OS.
8. Return the printer driver for OPOS and Windows saved in "Preparing a Recovery
Medium."
Restrictions
❏ The size of the image data to be saved amounts to 500–600 MB. Saving this much data
requires a large-capacity device, such as a CD-R, MO, or server.
❏ Because of restrictions by EasyRestore, the HD image data file (HDIMG003.PQI) cannot be
divided.
❏ Because EasyRestore runs only on MS-DOS, it is a requirement of "Saving of HD Image
Data" that MS-DOS can recognize the saving destination device.
❏ When startup is initiated from the built-in hard disk of the IM-800, recovery is impossible.
Rev. I
MR Series Technical Reference Manual
OS and Drivers 4-15