Raid Card - Epson MR Series Technical Reference Manual

RAID Card

A RAID card can be inserted into the upper slot on the riser frame.
1. Remove the IM-800 upper case. (See page 9-42.)
2. Remove the riser frame. (See page 9-43.)
3. Remove the HDD cable from the RAID card.
4. Remove the screw (S13) securing the PCI board (indicated below) to remove the RAID card.
RAID card
When replacing the PCI card, remove the dummy plate, if it is installed.
CAUTION:
Do not touch the connectors on the card to avoid failure due to contamination.
Rev. I
HDD cable
MR Series Technical Reference Manual
RAID card
screw (S13)
Disassembly and Assembly 9-45