Rear Case - Epson MR Series Technical Reference Manual

Rear Case

1. Remove the rear cover. (See page 9-8.)
2. Remove the front cover. (See page 9-9.)
3. Remove the cables.
DM-M820-013
4. Remove the hinge assemblies from the rear case. (See page 9-10.)
5. Remove 2 screws (S04) and 2 hex screws (S06) securing the rear case. And remove the rear
case. (The model with an MSR is used in the illustration below.)
screw (S04)
hex screw (S06)
Note:
You need to attach the plate to the rear case you ordered. Because the part is not supplied with the case
unit.
Rev. I
MR Series Technical Reference Manual
DM-M820-014
/015
Disassembly and Assembly 9-11
screw (S04)
rear case
plate attached to
the rear case
hex screw (S06)