Epson MR Series Technical Reference Manual page 264

SPRING, A
1. Remove the IM-800 upper case. (See page 9-42.)
2. Remove the SPRING ,A from the frame as the figure.
DC24V board
Install by the following procedure
1. Remove the double-sides tape under the frame.
2. Paste a new double-sides tape ,A under the frame.
3. Insert the SPRING ,A
4. Pinch the flame and the SPRING ,A with fingers to bond with the double-side tape.
9-48 Disassembly and Assembly
Frame
SPRING, A
Double-sides tape ,A
Rev. I