Safety Precautions For The Oi-Mr01 Ac Adapter - Epson MR Series Technical Reference Manual

Safety Precautions for the OI-MR01 AC Adapter

WARNING:
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual
noise. Continued use may lead to fire or electric shock. Immediately unplug the
equipment and contact your dealer or a SEIKO EPSON service center for advice.
Never attempt to repair this product yourself. Improper repair work can be dangerous.
Never disassemble or modify this product. Tampering with this product may result in
injury, fire, or electric shock.
Never insert or disconnect the power plug with wet hands. Doing so may result in severe
shock.
Do not allow foreign matter to fall into the equipment. Penetration of foreign objects
may lead to fire or shock.
If water or other liquid spills into this equipment, unplug the power cable immediately,
and then contact your dealer or a SEIKO EPSON service center for advice. Continued
usage may lead to fire or shock.
Do not place multiple loads on the power outlet (wall outlet). Overloading the outlet
may lead to fire.
Always supply power directly from a standard domestic power outlet.
Handle the power cable with care. Improper handling may lead to fire or shock.
Do not modify or attempt to repair the cable.
Do not place any object on top of the cable.
Avoid excessive bending, twisting, and pulling of the cable.
Do not place cord near heating equipment.
Check that the plug is clean before plugging it in.
Be sure to push the prongs all the way in.
If the cable becomes damaged, obtain a replacement from your dealer or a SEIKO
EPSON service center.
Regularly remove the power plug from the outlet and clean the base of the prongs and
between the prongs. If you leave the power plug in the outlet for a long time, dust may
collect on the base of the prongs, causing a short and fire.
Rev. I
MR Series Technical Reference Manual
ix