Epson MR Series Technical Reference Manual page 284

8. Remove the power supply from the lower frame by first moving it in the direction of
arrow 1, then in the direction of arrow 2.
2
1
lower frame
To install, reverse the removal procedure.
Note:
During reassembly confirm that the power supply is attached to the lower frame as shown in the
illustration above.
CAUTION:
Also, when you place the cable of power supply, put it under the USB cable.
Do not arrange the cable of the power supply near the end of the case. Otherwise, it
may be damaged when you install the IM-800 upper case or the CD/FDD bracket.
Do not arrange the cable of the power supply under the main circuit board. Otherwise,
it may be damaged when you connect the other cables to the main circuit board.
USB cable
9-68 Disassembly and Assembly Rev. I