•
Down 5:
This sets the touch operation recognized as the 3rd click.
(Down 5 becomes valid when it executed in the click time.)
•
Up 6:
This sets the touch operation recognized as the 3rd click
cancellation.
The following are the choices for the trigger settings
•
None:
Does not assign a touch operation.
•
Immediate:
Executes immediately after a touch operation.
•
Touchdown:
Executes when the panel is touched.
•
Liftoff:
Executes when the finger leaves the touch panel.
•
Time:
Executes when the touching is stationary.
•
Tap:
Executes when the panel is touched two times quickly.
Note:
Don't set Down 5 and Down 6 to "Immediate" because the system gets into a loop and has to be reset.
❏ [Add]
This adds a new button mode.
❏ [Delete]
This deletes a button mode.
❏ [Defaults]
This returns the button mode to its original settings.
Rev. I
MR Series Technical Reference Manual
OS and Drivers 4-65