Removing The Covers; Rear Cover - Epson MR Series Technical Reference Manual

Removing the Covers

Rear Cover

The instructions below describe the all models of the DM-M820.
1. Remove 6 screw caps and screws securing the rear cover. Then, remove the rear cover.
screw (S01)
rear cover
screw (S02)
Follow the steps below to assemble the unit.
1. Confirm the cables's connection to the rear case. And when reattaching the covers, be careful
not to catch the cables in the covers. (Wrap tape around the cables to hold them together for
easier replacement beneath the cover.) (The model with an MSR is used in the illustration
below.)
tape
cable
Note:
Be careful not to catch the cables between the unit and cover.
2. Attach the rear cover.
9-8 Disassembly and Assembly
screw (S01)
screw (S02)
cables
Rev. I