Power Supply - Epson MR Series Technical Reference Manual

Power Supply

1. Remove the IM-800 upper case. (See page 9-42.)
2. Remove the riser frame. (See page 9-43.)
3. Remove the CD/FDD bracket. (See page 9-49.)
4. Remove the HDD bracket. (See page 9-53.)
5. Remove the two screws (S13) securing the power supply.
6. Remove the power cables connected to the main circuit board.
7. Cut the cable tie and remove the DC24V cable from the DC24V board. (24V model)
cable tie
Note:
When installing the DC24V cable, use a new cable tie.
Rev. I
MR Series Technical Reference Manual
screw (S13)
DC 24V cable
Disassembly and Assembly 9-67