Features; Dm-M820 Features - Epson MR Series Technical Reference Manual

Chapter 1
Features and Overview

Features

The MR is a modular-type POS terminal consisting of a base unit, which is the IM-800, and a
display unit, which is the DM-M820. The IM-800 and the DM-M820 are also sold separately.
IM-800 Features
❏ IBM
®
PC/AT
❏ Intel
®
Celeron™ (FC-PGA/FC-PGA2 package) can be used. Either a 733 MHz or a 1.2 GHz
Celeron is factory installed.
❏ Two 168-pin DIMM sockets are ready for installation of a maximum 512 MB of memory
❏ An LCD unit (DM-M820) exclusive to the MR can be connected
❏ A 3.5-inch floppy disk drive is available
❏ A 3.5-inch hard disk drive or two 2.5-inch hard disk drive is available
❏ A CD-ROM drive or CD-R/RW drive is available as a factory option
❏ An Ethernet controller for 10Base-T/100Base-TX is installed as standard equipment
❏ Four serial interface ports are provided
❏ One PCI slot is provided
❏ A power supply for a TM printer is provided (For the 24V model)*1
❏ Cables on the rear of the IM-800 can be covered by the included cable cover
❏ A small footprint with maximum dimensions of 315 × 365 × 88 mm (W × D × H) {12.4 × 14.4
× 3.5"} (including rear cover)
*1 Applies only with the TM Printer Power Supply model.

DM-M820 Features

The DM-M820 is an LCD unit designed to be connected to an EPSON PC-POS system.
❏ 800 × 600 dots resolution using a 12.1 inch color TFT LCD
❏ A tilt mechanism for easy positioning of the screen viewing angle
❏ A cable cover or a unified cable performs cable management effectively
❏ Display settings of the LCD and the brightness of the backlight can be adjusted.
❏ A stain-resistant touch panel is used.*1
❏ Input by finger touch using the resistive film type of touch panel.*2
❏ An MSR unit can read ISO/JIS Track 1, 2, or 3 (only for models with an MSR unit) *3
Rev. I
®
compatible
MR Series Technical Reference Manual
Features and Overview 1-1