Touch Panel Driver - Epson SR-600 Developer's Manual

Confidential
2. Fix the bottom part of the LCD with two screws.
3. Attach the connecter.
4. Attach the cover.
Installation is completed.

Touch Panel Driver

Touch Panel Driver is a Mouse Emulater Driver which enables to operate the same operation as
mouse does by switching with the Serial Mouse Driver. This driver converts the absolute
coordinate data recived by touch panel driver via RS232C into a mouse equivalent coordinate
data, and inform it to the system. The application recognizes coordinate data input from the
touch panel device as a mouse data and performs its operation.
MS-DOS
Touch panel driver is not installed when this unit is shipped. Simple Batch File for copying is
available. Copy it from the backup directory to use. Move the Batch File to
"C:\BACKUP\TOUCH" and type the command written below to start installation.
Rev.A
INSTALL C:\TOUCH[Enter]
Developer's Guide SR-600
Cover
Peripherals/Option Installation 6-7