Connecting The Dm-M820; Connector Cables For A Dm-M820 With A Touch Panel And Msr; Connector Cables For A Dm-M820 With A Touch Panel And Without An Msr - Epson MR Series Technical Reference Manual

Connecting the DM-M820

Be sure to unplug the power cable for the IM-800 or PC before you connect the cables for the
DM-M820.
Connectors on the IM-800

Connector Cables for a DM-M820 with a Touch Panel and MSR

❏ DC plug
❏ Display connector
❏ Serial port connector Connects to the touch panel COM1 or COM2 port.
Note:
If you are using a DM-M820 with a touch panel, be sure to connect the serial port connector to
COM1 or COM2. Do not use COM3 or COM4.
Also if you are using a DM-M820 with a touch panel, do not install a mouse driver. Installing a
mouse driver can prevent the touch panel from working.
❏ Keyboard out
Note:
Be sure not to connect to the mouse port.
❏
Keyboard in

Connector Cables for a DM-M820 with a Touch Panel and without an MSR

❏ DC plug
❏ Display connector
❏ Serial port connector Connect to the COM port for the touch panel on the IM-800 or PC.
Rev. I
Serial port connectors
Keyboard out
Connects to the 12 VDC output of the IM-800.
Connects to the display port of the IM-800.
Connects the keyboard out to the IM-800 keyboard port.
If you are using an external PS/2 keyboard, connect it to the keyboard
in connector.
Connect to the 12 VDC output on the IM-800 or the AC adapter
(OI-MR01).
Connect to the display port on the IM-800 or PC.
MR Series Technical Reference Manual
DC plug
Display connector
Setup for the IM-800 and the DM-M820 2-3