H Detail Black Clip Adjustment (16:9); Detail Black Clip Adjustment (16:9) - Sony Digital Betacam DVW-707 Maintenance Manual

Hide thumbs Also See for Digital Betacam DVW-707:
Table of Contents

Advertisement

7-16. Detail Signal Adjustment (16:9)

7-16-7. H Detail Black Clip Adjustment (16:9)

Note
Perform this adjustment, if necessary, to suit the custom-
er's preferences.
Preparation
. On the setup menu, set as follows.
PAGE
: S12*FUNCTION 1/2
ITEM
: DETAIL
ITEM
: TEST OUT
. OUTPUT/DCC switch (inside panel)
. Shoot a grayscale chart (16:9) in the full underscanned
monitor frame.
Equipment
: Waveform monitor
Test point
: TEST OUT connector
: 1 Lens IRIS
Setting point
Spec.
: Open the lens iris by one step from the
reference setting
A = 100 ±2 IRE (NTSC)
A = 700 ±14 mV (PAL)
. Select the line at the center white portion of the gray-
scale chart.
Adjustment Procedure
Equipment
: Waveform monitor
Test point
: TEST OUT connector
1. Select the 16:9 mode.
PAGE
: S14*WIDE SCREEN
ITEM
: 16:9/4:3 MODE
2. On the setup menu, adjust as follows.
PAGE
: S16*LEVEL 1
ITEM
: DTL H B. CLIP (Factory setting : 0)
Spec.
: Set the edges of portion B to the
desired clip level.
7-26
16:9 mode
ON
ENC
CAM/ON
A
16:9
B
7-16-8. V Detail Black Clip Adjustment (16:9)
Note
Perform this adjustment, if necessary, to suit the custom-
er's preferences.
Preparation
. On the setup menu, set as follows.
PAGE
: S12*FUNCTION 1/2
ITEM
: DETAIL
ITEM
: TEST OUT
. OUTPUT/DCC switch (inside panel)
. Shoot a white window chart (16:9) in the full under-
scanned monitor frame.
Equipment
: Waveform monitor
Test point
: TEST OUT connector
: 1 Lens IRIS
Setting point
Spec.
: Open the lens iris by one step from the
reference setting
A = 100 ±2 IRE (NTSC)
A = 700 ±14 mV (PAL)
. Select the line at the bottom of the center white portion
in the white window chart.
Adjustment Procedure
Equipment
: Waveform monitor
Test point
: TEST OUT connector
1. Select the 16:9 mode.
PAGE
: S14*WIDE SCREEN
ITEM
: 16:9/4:3 MODE
2. On the setup menu, adjust as follows.
PAGE
: S16*LEVEL 1
ITEM
: V DTL B. CLIP (Factory setting : 0)
Spec.
: Set the level of portion B to the desired
level.
16:9 mode
ON
ENC
CAM/ON
A
16:9
B
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents