2.15.2 AIS SETUP MENU
To configure the CPN Series Chart Plotter to receive AIS data, follow the procedure:
1. Press the
the Pages Icons to display AIS and tap on it.
2. Tap on AIS SETUP. The AIS menu appears. The available functions are described in
the following table:
Display
Activation Range
CPA Alarm
CPA Limit
TCPA Alarm
TCPA Limit
SART/MOB/EPIRB Test
2.15.3 QUICK INFO ON AIS TARGET
Tap on an AIS Target icon, the following information is displayed.
The selected AIS Target icon is surrounded by a square frame when user places the cursor over the icon.
2.15.4 AIS TARGET COLORS
The received AIS Targets are shown in color. The color depicts the type of AIS ship shown
on the Chart page. Refer to following table.
CPN700i and CPN1010i Multimedia Chart Plotters
key, move the
ShuttlePoint knob or tap on the right top arrow to scroll
: Turns the display of AIS Targets overlay on the cartography On or Off.
: Defines the range from the fix within which the AIS Target becomes active. The values
allowed are from 0.1 to 20Nm.
: Turns On or Off the alarm.
: The values allowed are from 0.1 to 10Nm.
: Turns On or Off the alarm.
: The values allowed are from 1 to 30 Min.
: Turns On or Off receiving of AIS-SART, AIS-MOB or AIS-EPIRB test alerts.
Page 115